Does the journal bearing need lubrication? Which lubrication method is recommended?

Jan 03, 2026 Leave a message

As the core part of sliding bearing, sliding bearing is supported by lubricating film to reduce friction and abrasion during operation. All journal bearings require lubrication, but the method of lubrication shall be selected in combination with working condition parameters (e.g. speed, load and temperature) and equipment characteristics (e.g. structure, cost and maintenance requirements). The specific analysis is as follows:

 

1.Reasons why journal bearings must be lubricated.
Reduce friction and abrasion: Lubricating film separates metal surfaces in direct contact to prevent adhesive abrasions and scratches.
Heat dissipation and cooling: During high-speed operation, frictional heat can cause the bearing temperature to exceed 200° C. The lubricant takes heat away by circulating, preventing material from softening or failing.
Antiseptic cleaning: Lubricating oil can isolate corrosive media in the air, while cleaning abrasive particles, thus extending the service life of bearings.

 

2. Classification and Applicable Scenarios of Lubrication Methods
Hydrodynamic lubrication
Principle: When the axle neck rotates, the lubricating oil forms a pressure film due to wedge clearance, completely isolating the contact surface.
Applicable scenarios
High speed and light load: e.g. spindle of steam turbines and generator (speed > 3000r/min, load < 10MPa).
Continuous operation equipment: A stable oil film bracket is required to avoid dry friction during the start and shutdown phases.
Recommended lubrication method
Oil ring lubrication: By driving the oil ring on the shaft neck rotation, the lubricant is thrown to the bearing surface. Suitable for low to medium speed (< 1000r/min) and medium load scenarios (e.g. machine tool spindles).
Pressure oil supply lubrication: Forced oil supply through the pump to form a stable oil film suitable for high-speed (> 1000r/min) and heavy loading (> 10MPa) (e.g. large compressor and stern shaft tubes).
Oil injection lubrication: highpressure oil is injected directly into bearing clearance to improve heat dissipation. Suitable for ultra-high-speed (> 20,000 r/min) or high temperatures (e.g. aero aero engines shafts).
3.Hydrostatic Lubrication
Principle: Oil is supplied to the bearing clearance through the external high pressure pump, forming a static oil film independent of speed.
Applicable scenarios
Low speed and heavy load: e.g. rolling mills, mining machinery (rotational speed < 10r/min, load > 100MPa).
For equipment that starts and stops frequently: Avoid dry friction before dynamic pressure oil film forms.
Recommended lubrication method
Constant pressure oil supply system: equipped with accumulator to compensate for pressure fluctuations and ensure stable oil film thickness (such as nuclear power main pump bearing).
Doublepump switching system: main pump and standby pump switch automatically to ensure continuous oil supply (e.g. the slewing bearings for large cranes).

Journal Bearing

4 . Boundary Lubrication
Principle: Lubricant additives (such as extreme pressure agents, antiwear agents) form a chemical adsorption film on the metal surface to prevent direct contact.
Applicable scenarios
Low speed heavy load or impact load: e.g. construction machinery hinge, engineering machinery dowel (surface velocity < 1.5m/s, load > 50MPa).
Bad environment: high temperature, corrosive media or dust pollution (e.g. internal combustion engine crankshaft bearings).
Recommended lubrication method
Extreme pressure grease: Grease containing molybdenum disulfide (MoS2) or graphite to enhance abrasion resistance (e.g. bearing of mining equipment).
Solid lubrication coating: Polytetrafluoroethylene (PTFE) or molybdenum disulfide is sprayed on bearing surfaces to reduce friction coefficient (e.g. in spacecraft deployment mechanisms).

 

5. Mixed lubrication
Principle: Dynamic pressure oil film and boundary lubrication film coexist, suitable for equipment with variable working conditions.
Applicable scenarios
Variable load equipment: yaw bearings such as wind turbines (load varies with wind direction).
Intermittent operation equipment: such as port cranes walking wheel bearings (often start and stopped).
Recommended lubrication method
Intelligent lubrication system: Monitor oil film thickness or temperature through sensors (such as high-speed rail traction motors bearings) to automatically adjust oil supply.
Compound lubricant: A Lubricating oil containing nanoparticles with dynamic pressure and boundary lubrication properties (e.g. spindle of CNC machine tool spindles).